Vetted Pool Remodeling Contractors
Rough, stained, or failing surface? Get matched with vetted resurfacing pros and compare free quotes on plaster, quartz, and pebble finishes.
Free & no obligation. Takes under 60 seconds.
500+
Projects Matched
7
Major Markets
Free
No Obligation
Resurfacing replaces your pool's interior finish — the layer in direct contact with the water. Every plaster or aggregate surface eventually wears out, and once it does, water starts reaching the shell underneath. The longer you wait, the more expensive the fix.
If the shell, tile, coping, decking, and equipment are otherwise sound, resurfacing alone is usually the right project. It is the most common pool renovation precisely because surfaces wear faster than the rest of the pool.
Pool Remodeling Pros is a free matching service. We connect you with vetted, licensed local resurfacing contractors so you can compare finishes and quotes with no obligation.
A new finish stops water from reaching the concrete underneath — the failure mode that turns a resurface into a structural repair.
Rough plaster and exposed aggregate are tough on feet and swimsuits. A fresh finish brings back that broken-in, smooth surface.
Resets staining, etching, and discoloration. Pair with new waterline tile and the pool reads like a new build, not a tired one.
Modern quartz and pebble finishes resist staining, hold color longer, and need less aggressive chemistry to keep looking good.
The most economical finish; typically lasts 7–15 years depending on climate and chemistry.
Quartz-aggregate blends offering better stain resistance and a 10–15+ year lifespan.
Pebble surfaces (PebbleTec, Pebble Sheen) — the most durable, 15–25 years in most markets.
Removing the failed layer and prepping the shell so the new finish bonds properly.
Resurfacing pairs naturally with new waterline tile for a complete visual reset.
Proper fill, brushing, and water chemistry start-up that protects the new finish.
A typical timeline from first quote to fully restored pool:
1–2 days
Submit one request. We match you with vetted local resurfacing pros and you receive free, no-obligation quotes.
1–2 days
Pool is drained and the work area is protected. Any waterline tile being replaced is removed.
1–2 days
Failed plaster or aggregate is chipped out and the shell is prepped so the new finish bonds properly.
1 day (plaster) / 1–2 days (pebble)
Crew applies plaster, quartz, or pebble per spec, troweled and finished by hand.
10–14 days
Surface is acid-washed (pebble) or brushed, pool is refilled, and water chemistry is balanced daily to protect the new finish.
Resurfacing pricing depends on finish, pool size, and how much surface prep is required. Typical ranges below; see our city pages for local figures (LA, Phoenix, and Houston all price differently).
| Project | Typical Cost Range |
|---|---|
| Plaster (Marcite) Resurface | $4,000 – $8,000 |
| Quartz Resurface | $6,000 – $10,000 |
| Pebble Resurface (PebbleTec / Sheen) | $9,000 – $15,000+ |
| Per Square Foot (plaster / aggregate) | $9 – $20 / sq ft |
| Waterline Tile Refresh (add-on) | $1,500 – $5,000 |
Ranges are general estimates for planning. See any city page for local ranges and permit guidance.
The three interior finishes side by side. The right pick depends on budget, climate, and how long you plan to keep the pool.
| Finish | Lifespan | Best For | Typical Cost |
|---|---|---|---|
| Plaster (Marcite) | 7 – 15 years | Lowest cost up front; classic light-blue water look. | $4,000 – $8,000 |
| Quartz | 10 – 15+ years | Better stain resistance and richer color than plaster; great middle option. | $6,000 – $10,000 |
| Pebble (PebbleTec / Sheen) | 15 – 25 years | Most durable and stain-resistant; best cost-per-year in harsh climates. | $9,000 – $15,000+ |
If the surface feels like sandpaper or leaves a chalky film on hands and swimsuits, the plaster has etched and is overdue.
Thin patches of finish lifting off the shell mean the bond is failing and the surface is past saving.
Stains that return right after cleaning usually mean the surface has become too porous to stay clean — a fresh finish solves it.
Loss that is not evaporation often points to leaks at the finish or fittings. Resurfacing addresses small leaks at the same time.
Catch surface failure early. Once water gets past the finish to the shell, the project shifts from a resurface to a structural repair — far more expensive and disruptive.
Climate shortens or extends the timeline. Intense UV, hard water, and year-round use (Phoenix, Orange County) push resurfacing closer to every 10–15 years. Cooler four-season markets (Memphis, Richmond) stretch lifespan toward 20+.
Start-up matters as much as application. The first two weeks of brushing and balanced chemistry protect the new finish for its entire life — choose a contractor who treats start-up as part of the job, not an afterthought.
We screen contractors for an active state license and insurance, and we tell you exactly where to verify.
Get plaster, quartz, and pebble quotes in one go so you can pick the right material for your climate and budget.
Quotes are free. You only move forward if a contractor and price are right for you.
Our city pages publish local ranges so you walk into a quote knowing what fair looks like in your market.
We match homeowners with vetted pool resurfacing contractors in these markets:
Plaster typically lasts 7–15 years, quartz 10–15+, and pebble 15–25 — shorter in high-UV, hard-water, or year-round-use markets, longer in cooler climates with a short swim season.
Rough or chalky texture, persistent staining, plaster flaking or 'spalling,' exposed aggregate, surface cracks, and rising water loss are all signs the finish is failing.
Plaster is lowest cost up front; quartz balances cost and durability; pebble lasts longest and resists staining best. The right choice depends on budget, climate, and how long you plan to keep the pool.
The on-site work is typically 5–10 days from drain to refill, followed by 10–14 days of brushing and chemistry start-up before the pool is fully back in normal use.
If the shell, tile, decking, and equipment are sound, resurfacing alone is usually enough. If several of those are also aging, bundling them into a remodel is typically the better long-term value.
It depends on your city. Many municipalities exempt cosmetic-only resurfacing, while others (and parts of Florida, for example) require a permit. Your matched contractor pulls the correct permit for your location.
Brushing the first two weeks removes plaster dust and exposes the finish evenly. Combined with balanced water chemistry, it locks in surface life — skip it and you can shorten the finish's lifespan by years.
Plaster resurfacing is roughly $4,000–$8,000, quartz $6,000–$10,000, and pebble $9,000–$15,000+. By the square foot, expect $9–$20 for plaster and aggregate finishes. Local market shifts these numbers — see our city pages for specifics.
Tell us about your pool and we'll match you with vetted, licensed local pool resurfacing contractors. Free and no obligation.
Prefer to talk? Find your local pro →